Stuffed Green Peas Uttapams

Do you want to take the dosa party to the next level at your home and thinking of what else you can do with the remaining batter, then we have a perfect dish for you. In just a few minutes your leftover dosa batter will convert into a delicious dish.

These stuffed uttapam’s are seriously a treat for your guest. Serving with Green chutney or coconut chutney will be an add-on to the dish.

You just need a few ingredients for these uttapa’s and they are so easy that you won’t feel any issues while making them at home.

Ingredients Required

  • Green Peas (Boiled and Coarsely Crushed) – ¾ Cup
  • Dosa Batter – 1 Cup
  • Green Chillies (Finely Chopped) – 1 Tbsp
  • Coriander Leaves (Finely Chopped) – 1 Tbsp
  • Oil – For Greasing and Cooking
  • Salt – To Taste

The Process to make Green Peas Uttapam

1) Take a bowl and add boiled and crushed green peas, coriander green chillies & salt. Give it a good mix and keep the mixture aside.

2) As the dosa batter is already ready, take a non-stick tava and heat it. Then sprinkle some water to check whether the tava os ready or not. Then wipe it using a piece of cloth.

3) Then grease the tava with adding little oil.

4) Pour a small portion of batter on the tava and spread it using a spoon into the circular shape. The size of the uttapam is depended upon your choice.

5) Add one teaspoon of green pea mixture on the uttapam and press a bit.

6) Then cook it from both the side using little oil until it becomes golden brown in colour.

7) After cooked, Keep the prepared uttapam aside and repeat similar steps from 4 to 6 with remaining batter.

8) Your Stuffed Green Peas Uttapam is ready, serve to your family and friends immediately.

9) You can serve coconut or green-mint chutney along with the Uttapa’s.

Advertisements

Materials Used In 3D Printing: An Easy Guide For Novices

Materials Used In 3D Printing Supplier

Materials Used In 3D Printing Supplier | Image Resource : 3dprintingforbeginners.com

Being oblivious to all the materials that are available for 3D printing is quite obvious if you have just discovered the world of 3D printing. 3D printing is getting more recognition with each passing day and people are starting to recognize the exciting possibilities which are tied to the world of 3D printing.

Of course, if you are a beginner at this, you need to familiarise yourself to all the materials used in 3D printing. So what better way to do that than to just take a look at an easy guide where you can look at all the materials and then make sure which one you should buy for your next 3D printing project.

The Popular Materials Used In 3D Printing

All the materials that are available for 3D printing come with their pros and cons. Depending on what kind of material you need you should take a look at all of them and then finalize your decision.

Materials Used In 3D Printing

Materials Used In 3D Printing | Image Resource : 3dprint.com

1. Acrylonitrile Butadiene Styrene which is also known as ABS is the polymer which is petroleum based. This is one of the more popular materials which is used for the purpose of 3D printing. It not only possesses a high amount of resistance towards high temperatures but it is also a very versatile material which can be quite conveniently used in making real world components. Due to the fact that it is quite inexpensive, it is widely used in the making of prototypes. It comes in a variety of colours. The only downfall to this material is the fact that if it is heated at a high temperature then it produces toxic fumes.

2. Polylactic Acid or PLA is derived from natural resources such as cornstarch, surgarcane, et cetera. It is one of the rather popular materials used in 3D printing. PLA is biodegradable in nature, making it environment friendly. The temperature at which these materials are printed stands at 220°C and 180°C. Compared to ABS, PLA does not produce any sort of toxic fumes due to its biodegradable nature. The only con to this material is the fact that the post processing method for this material is rather difficult.

3. Nylon: Quite a renowned choice in the world of 3D printing, this material is quite a durable and strong polymer which has a silk like translucent finish to it. It is also referred to as ‘white plastic’ because of this reason. Nylon tends to take in moisture during the printing process so one cannot expect the measurements to be perfect.

4. ULTEM: A subclass of the Polytheremide material, this one has the ability of making your 3D prints to be quite strong and durable since this material in itself is quite sturdy. This material is quite strong because of the glass fibre reinforcements it contains. This material needs a high amount of temperature to be melted even though it is a thermoplastic.

Most of the materials are used based on their pros and cons.

Several Benefits Availed From Lithium Ion Battery Materials Suppliers

Lithium Ion Battery Materials Suppliers

Lithium Ion Battery Materials Suppliers | Image Resource : malvern.ssl.cdn.sdlmedia.com

With the advancement of the technology, significant efficiency have been achieved in the various other sectors including electronics and electrical. The vital and important part of the electronic sector is the batteries which is the source of power of such gadgets. The demand of the suppliers dealing with such battery materials is constantly increasing in order to obtain high performance based batteries.

The manufacturing requirements are increasing day by day. It is pretty important to assemble the basic battery materials before finally starting the production processes. For higher efficiency cycle, power storage capacity, we approach trusted and renowned lithium ion battery materials suppliers. Approaching certified suppliers or dealers is not just enough. There are several other benefits one can obtain form them.

What are the benefits obtained from lithium ion battery materials suppliers?

Clear specification of the technology: Mere the chemical compounds are not enough. The best lithium ion battery material dealers would provide complete details regarding the technology used in it and its necessary pros and cons.

Range of applications are specified: the battery material of one type can be ideal for one application (say mobile phones) but the same type cannot be useful for other purposes (say automobiles). When requirements are specified, materials are appropriately sold to you.

Essential safety mechanisms: the best suppliers would particularly provide you such products which are non hazardous or least hazardous. They ensure the presence of necessary safety mechanisms to avoid overheating of the batteries.

Quality oriented products at a reasonable price: the best part of the lithium ion materials suppliers is that they provide quality assured products. For this, they charge the appropriate price without any ill will.

Check out the details of lithium ion battery material dealers online

If you want to find the best dealer nearby, internet would be a better option. Just enter your location and you would get the lists of different dealers present near you. You can even approach them at the address given or directly call them to get the queries cleared.

The order placed can be few if it relates to the commercial purposes. However, for manufacturing purposes, bulk quantities are required. For the production purposes, keen attention should be paid with respect to the quality aspects. Too high content of any metal or non metal might prove dangerous for the workers. Avail the benefits but focus on the necessary tips too.

Try The Recipe Of Roti Patra To Make At Home

Patra commonly prepared with colocasia leaves. But this is a new version of it made with chapati. It’s simple to make, healthy and tasty also.

Roti/chapati patra is an amazing recipe to spice up your day. The relishing taste, the appealing texture & amazing aroma of Roti patra is exciting for the taste buds. Be it adults or kids, no one could resist the amazing dish. If you want to know how to prepare this amazing dish then here is the recipe provided. It is cool for the beginners even to make in a lesser time.

Ingredients to make Rotli na patra (roti ke Patra):

● Whole wheat chapati-6

● Besan/-1 1/2 cup

● Sliced Methi leaves-3/4 cup

● Red Chilli pwd-1 tsp

● Cumin & Coriander pwd-1 tsp

● Turmeric pwd-1/2 tsp

● garam Masala-1/2 tsp

● Salt as per taste

● Sugar & Lime juice as per taste

● Water as needed

● Sliced Green Chilli-1

For Tempering:

● Oil-2 tbsp

● mustard seeds-1 tsp

● Sesame Seeds-1 tsp

● Sliced green chili-4

How to make Rotli na patra (roti ke Patra):

● Heat enough water in a steamer. Put besan in a vessel, drop red chilli powder, cumin powder, coriander powder, turmeric powder, sufficient water, lemon juice & sugar & mix in a thick paste. Include salt & combine it again.

● Apply the paste everywhere on the chapati & roll it tightly. Put the rolls on a perforated plate & keep it in the steamer. Close with the lid & steam until done.

● Take the rolls out & allow them to cool thoroughly. Slice in roundels.

● Heat oil in a non stick vessel. Add asafoetida, sesame seeds & mustard seeds to the oil & once they splutter, drop the patra slices & toss.

● Put onto a serving plate, decorate with coriander leaves & sesame seeds & distribute hot with hot cup of tea & tomato sauce.

Note:

● Utilize leftover rotis to prepare patra.

Paneer Pulao Recipe-Vegetarians Beloved One Pot Meal

Paneer Pulao is a delightful recipe for the vegetarians. This is a simple and delectable recipe, that could be made with the available components in the kitchen. The recipe is prepared with marinated paneer & is cooked with a low flame using the aromatic masalas. The recipe is ideally being eaten on the festivals, events and special occasions. Paneer Pulao is much better with daal tadka & dal makhani. You could also pair it with mutton korma & butter chicken masala.

Ingredients (1 cup = 250 ML):

To cook rice:

  • basmati rice-1 cup
  • water-4 cups
  • tej patta/bay leaf-1
  • salt-½ tsp
  • oil-1 tsp

For paneer pulao:

  • clarified butter/ghee-1 tbsp
  • cottage cheese/paneer-8 cubes
  • jeera/cumin-1 tsp
  • dalchini/cinnamon stick-1 inch
  • lavang/cloves -5
  • kali mirch/black pepper-10
  • thinly chopped onion-1 medium size
  • finely sliced ginger-1 inch
  • Properly sliced garlic-1-2 clove
  • green chilli slit-1
  • finely sliced tomato-1 medium size
  • matar/peas -¼ cup
  • Properly chopped carrot-1
  • lal mirch powder/kashmiri red chili powder-¾ tsp
  • garam masala powder-½ tsp
  • salt as per the taste
  • cottage cheese/paneer crumbled-¼ cup
  • Finely sliced coriander leaf-2 tbsp

Preparation:

– Initially, in a big pan heat ghee & saute paneer until they turn brown golden. Put them besides.

– In the same vessel drop cinnamon stick, cloves, black pepper & cumin.

– Saute them with low flame until they convert aromatic.

– Next drop thinly chopped ginger, onions, green chilli & garlic.

– Next drop tomato & saute until they turn smooth & mushy.

– Include peas & carrot. Saute them properly.

– Then, drop garam masala powder, red chili powder & salt. Then saute it well.

– Then drop crumbled paneer & mix finely.

– Now add cooked rice & mix them softly.

– Put the fried paneer on the cooked pulao, then cover & start simmering for like five mins.

– Now decorate with coriander, fried paneer pieces & crumbled paneer.

– Lastly, distribute paneer pulao along with onion tomato raita.

Buy Nanowires Online Easily While Knowing Its Properties

Buy Nanowires Online

Buy Nanowires Online | Image Resource : cdn-images-1.medium.com

Nanowires are the small wire like structure ranging from 1 to 100 nm. The introduction of nanowires is considered as the vital advancement of the nanotechnology. It has the power pack properties of an insulator, semi conductor, a metal and many more. The type of material which is used for making such wires readily describes the properties of the material.

With the passage of time, there is significant advancement in the technology wherein the size of the electronic appliances has readily reduced. Nowadays, people buy nanowires online just for the purpose of studying and researching upon its features and properties. There are many fields in which these nanowires are used.

Different properties to know before you buy nanowires online

The size of the nanowires is the most appealing factor which makes it highly demandable in different sectors. The small size of the wires is very useful in displaying different properties without being expected. The most interesting nanowires property is that it is considered as the ballistic conductors.

In the ballistic conductors, electrons move in a definite direction without any collisions. This as a result does not create heat as a by-product as we can find in the normal conductors. Hence, through the naowires, electricity conducts efficiently without intense heating the material. Gold as a metal is not used for the electronic purposes while its nanosized nanowires are the better conductors of electricity.

Consider the nanowires property well before buying it

As said earlier, the nanowires possess special properties of acting as an insulator and a semiconductor. It is entirely dependent upon the type of material used for making it. Certain metals at a nanoscale are the best conductors of electricity and eliminate the demerits of different wires. However, it is properly researched whether it would be suitable to install at a particular environment or not.

Emerging Trends Of PGDM In India

The PGDM (post-graduate diploma in management) is a way to get a handful of jobs in top companies. There is no doubt that jobs have immensely increased in several sectors that are demanding skilled professionals to complete different tasks.

In turn, the PGDM in India has emerged to be one of the popular courses to train candidates in order to have a secure and booming future. There is no limit to attain knowledge or give a kick-start to your career as there are different domains available. The business and entrepreneurs have certainly proved this point. Even a well-acquainted expert is seeking management courses to pursue higher studies.

Now PGDM is not only done in different specializations, such as human resources, marketing and finance. It has emerged in many different areas including accounting and operation management. The institutes are adding International Business, Banking and Finance, Global Operations, Apparel Management, Public Policy and many other management courses to their list of courses that have started a trend for PGDM in India.

PGDM in India

PGDM in India | Image Resource : iemseducation.in

  • Improve yields for admission in MBA courses: Students are opting for management courses at a large number to improve their professional skills and for better opportunities.
  • Increase in Self-funding students: The candidates are managing their own fund and trying to complete their management simultaneous to their jobs. This allows them to easily apply for higher positions and with the addition of their experience; it is only a plus point for them.
  • MBA courses for employees sponsored by companies: There are many top companies, mainly MNCs, which sponsor their employees for higher studies. Most companies encourage their employees to pursue PGDM courses. This financial and professional support that companies are providing to their employees is going to increase in the future.
  • Rise in women enrolment for MBA courses: The female’s expertise has been increasing in the management field for the last few years. They are actively participating in the business and corporate sectors giving out a perfect balance in the management sector.

It is now possible to have a better idea and knowledge of the trends of PGDM in India that allows a number of professionals to make a quick decision. Also, it is a great way for self-development, experience and working in strict professional surroundings to get you started with the new Endeavour. However, it is essential to do thorough research about the course before going opting for it. You must be aware of the future scope and sectors you choose before deciding to make a career goal.